Custom Solutions
Customization is at the heart of what we do. From matching existing profiles for restoration projects to creating entirely new designs, we have the expertise to mill virtually any pattern or texture you need.
Custom profiles can be quoted as a special-order run. The mill confirms the drawing, net dimensions, fiber, minimum run, and timing before the order is accepted.
Profiles
Western Timber produces single and double Wavey-Edge plank, bevel, and rabbeted bevel siding with consistent milling and profile control. Available across multiple species and specs, with the ability to run custom variations to meet project requirements.
Tongue and Groove: Milled tongue along one edge of the board that fits into a corresponding groove on the adjoining board, creating a tight, consistent connection between pieces.
Shiplap: Boards milled with an overlapping rabbeted edge that allows adjoining pieces to fit together with a consistent reveal across the face of the installation. Western Timber produces shiplap profiles across multiple species and specifications, with custom variations available to meet project requirements.
S1S2E: Surfaced on one face and two edges, providing uniform dimensions while maintaining one rough face for a more natural appearance.
Wavey Edge: Western Timber produces single and double Wavey-Edge plank, bevel, and rabbeted bevel siding with consistent milling and profile control. Available across multiple species and specs, with the ability to run custom variations to meet project requirements.
End Matching: End-matched material available from 11/16" to 1 5/8" thick and up to 8" wide, milled for tight, consistent fits and efficient installation. Ideal for reducing waste and maintaining continuity across longer runs.
Bevel-Edge: Western Timber produces bevel-edge profiles with an angled edge that creates a distinctive shadow line between boards. Available across multiple species and specifications, with consistent milling and the ability to run custom variations to meet project requirements.
Textures
24-Grit & 120-Grit: With abrasives ranging from 16-180 grit, products with both rustic and fine finishes can be achieved.
Wirebrushed: Wirebrushed textures are produced by removing the softer fibers of the wood to highlight the natural grain. Western Timber can achieve finishes ranging from a light, subtle texture to a more aggressive, weathered look.
Resawn: Western Timber manufactures fresh text & rough text products ranging from 1/2 - 12 inches thick up to 12 inches wide from 0 to 45 degree cut.
Circle-Sawn: Rustic finished are produced on our 36" circular resaw. This finish can be applied to virtually any standard pattern, as well as our Teton profiles.
Hand Hewning: Rustic finishes are achieved by our hand hewners. Western Timber hand hewns our Teton Patterns, Log Siding, Trim, as well as Flooring and other WWPA Standard Pattern. Several different styles can be achieved with light to aggressive hewning.
End-matched material available from 1–2" thick and up to 8" wide, milled for tight, consistent fits and efficient installation. Ideal for reducing waste and maintaining continuity across longer runs.
